Swivel Joints

We have extensive experience in the application of Swivel Joints in fluid transfer systems and as official UK distributors for Emco Wheaton, we can be confident the swivels we offer are built to last. Our swivel range includes the following;

Emco Wheaton D0002

d0002The D0002 is the basis for Emco Wheatons’ single ball track swivel joints. The D0002 is compact and lightweight when compared
with other similar swivels and its unique internal flange design makes it possible to change the seal without removing the swivel joint from the pipeline.

The D0002 Swivel Joint can be lubricated via grease nipples and if required the balls can be removed and replaced via the ball track plug.

This heavy duty Swivel Joint is ideal for most applications with the hardened and polished ball track providing a high degree of running precision and long service life, even under extreme loads. The sealing surfaces of the D0002 are plated with stainless steel to prevent corrosion and precision-finished to ensure excellent seal quality.

Sizes:                                    DN50, DN80, DN100, DN150, DN200, DN400

Material:                             Carbon steel and low temperature steel

Seal material:                   Buna N, Viton, PTFE (others upon request)

Working Pressure:         Operational – 25 bar

Test Pressure:                   Test pressure – 37.5 bar

Temperature range:       -10° C to + 200° C

 

Emco Wheaton D1010 d1010

The D1010 is Emco Wheatons’ standard swivel joint with two ball tracks and is typically used within Emco Wheaton Marine Loading Arms. Both ball tracks of the carbon steel version are hardened and polished, giving the swivel joint a high degree of load capacity and long service life, even under extreme loads.

The internal flange makes it possible to change the seal without removing the swivel joint from the pipeline. The sealing surfaces of the D1010 are plated with stainless steel to prevent corrosion and precision-finished ensure a tight seal.

The D1010 swivel joint is not supplied with hardened ball tracks due to the material characteristics of the aluminium alloy used in its construction.

The D1010 can be lubricated via grease nipples and if required the balls can be removed and replaced via the ball track plugs.

Sizes:                                    DN150, DN200, DN250, DN300, DN400, DN500

Material:                             Carbon steel, low temperature steel or aluminium alloy

Seal material:                   Buna N, Viton, PTFE, Perbunan

Working Pressure:         10 bar to 25 bar

Test pressure:                   15 bar to 37.5 bar

Temperature range:       -50° C to +200° C

 

Emco Wheaton D1133 Stainlessd1133

The Emco Wheaton D1133 swivel joint is the All-Stainless variant of the D0002 – particularly suitable for applications in the chemical industry.

In the D1133 swivel joint, the ball track is protected by two O-rings which prevent dirt entering from the outside or product escaping from within. Should the main seal fail, leakage is indicated through the leak detection ports.

All internal parts as well as the external parts are made of stainless steel – the ball track can be hardened or unhardened depending upon the anticipated load.

Sizes:                                    DN50, DN80, DN100, DN150, DN200, DN400

Material:                             Stainless steel

Seal Material:                   Perbunan, Viton, PTFE, Special compounds

MAWP:                                Operational: 10 bar to 40 bar

Test pressure:                   15 bar to 60 bar

Temperature range:       -50° C to + 250° C

 

Emco Wheaton D2000

The Emco Wheaton D2000 is the original sandwich design swivel joint. The sandwich design separates the hardened steel bearing module from
the product-carrying components. In practical use, this design feature means that the swivel seals are protected from the product within the line and that when servicing is required, the swivel module can be easily unbolted and swapped for a new module without the need for cutting, welding or taking the arm out of service for lengthy periods.

With multiple material and seal options, the D2000 is suitable for nearly all media with temperatures ranging from –45 °C to +250 °C.

Sizes:                                    DN50, DN80, DN100, DN150, DN200

Temperature:                    –45 °C to +250 °C

Working pressure:         40 bar

Test pressure:                   60 bar

Flanges:                               Carbon steel, Low temperature steel, Stainless steel, Aluminum

Bearing module:              Carbon steel nickel plated

Sealing module:               Perbunan, Viton, FEP, EPDM, Fluoroloy K, PTFE

 

Emco Wheaton D2000 PTFEd2000_ptfe

The Emco Wheaton D2000 PTFE Swivel Joint is internally coated with PTFE and has a PTFE seal, lending itself to applications with highly aggressive materials.

In the case of the PTFE D2000, should the main seal fail, leakage is indicated through the leak detection port. This port is PTFE sleeved meaning that contact of product with carbon steel components is prevented.

Sizes:                                    DN50, DN80, DN100, DN150, DN200

Material:                             Carbon steel, PTFE lined

Seal Material:                   PTFE

Working pressure:         10 bar,

Test Pressure:                   15 bar

Temperature range:       -10° C to +150° C

We can help

Or Call:

+44(0) 1329 284145

API Couplers

Download Data Sheet

Related Products

Quick Links