ErectaStep quickly configures to gain safe access over pipes, bund walls, or other obstructions. Three platforms can be bolted together in a series without tower supports, providing up to 2.74m of linear clearance.
4 platforms can be bolted together by simply adding a tower support to each end. To design, simply measure your height clearance required, your length clearance, and download the catalog to refer to the chart for which stair model will best suit your needs.
Components share bolt hole patterns to reduce parts and erection time. No welding or fabrication is required to construct any configuration.
All components are robot and laser cut and welded. Platforms and stairs are stamped for the highest strength and accuracy available.
Assembly Line Platform
This configuration allows for travel over or around areas similar to assembly lines.
Stair Tower Access
This work platform system allows specific access to parts such as valves or a filters which require repeated access.
This style of industrial platform could permanently replace wobbly ladder or work stands.
Mezzanine Access Platform
This work platform system might allow access within a confined space to a mezzanine level of a warehouse.
Setup Up Platform
Two tiers of stairs in any direction is no problem for ErectaStep’s modular component system.
Pyramid Crossover Stairs
This 90 degree multi directional pyramid crossover system provides conveyor access in restricted spaces.
Custom Dolly Platform
This custom dolly platform provides 5.2 square metres of work space on an easy to position custom dolly.
5 Main Components
ErectaStep handrails are a single standard size and bolt to any platform side through a matching bolt hole pattern. Each handrail is constructed out of round pipe with an OD of just slightly less than 2″. Standard powder coat color is OSHA safety yellow to meet regulations.
Universal Work Platforms
The universal 914mm x 914mm platform is infinitely expandable through common bolt hole patterns, which allow stairs, handrails and other platforms to be attached to any side. Platforms are stamped from a single piece of aluminum and feature slip resistant surfaces.
The ErectaStep metal step unit offers a 26″ wide walk surface with slip resistant treads in 9″ vertical increments (only). The ANSI Safety yellow powder coat meets standards out of the box. Units ship broken down for lower shipping costs and are easy to assemble.
Tower Platform Supports
The tower support’s bolt hole configuration match the bolt holes on the ErectaStep platform. This allows a tower attachment to span the seam of two platforms or to be located on as many as 4 sides of a single platform system regardless of stair location.
The Platform Ladder component provides both tower support and additional access to areas unsuitable for stairs. Ladders are constructed entirely of aluminum and bolt to bottom of platform, without supplemental parts. Available in 11 heights.